All washable clothing products must not shrink over 5% of their original size after the first wash.Product materials must be listed in the product description with no exceptions.All products must be properly packaged.Shading variance between different parts of the same piece cannot be distinct.(Except for special designing requirements.) Buttonholes must keep the same opening size.The collar and the lapels may not join together. For collared garments, all collars must be done smoothly.(except for special designing requirements.) Puckering seams at all joints are not allowed.Frayed, fuzzy, ragged, or serrated edges are not allowed (except for special designing requirements.).The type and color of the threads used should be consistent with the color and texture of the fabric.The iron temperature should be kept between 180℃~200℃ to protect the fabric from dead pleats or burnt marks.All clothing products should be ironed flat.The size of the finished garment must be consistent with the designed specifications with a maximum tolerance range of 1.5 centimeters (roughly 0.6 inches).The surface of the leather fabric must not have pits, holes and, scratches that affect the appearance or functionality.All products should be free of stains such as grease stains, pen stains, rust stains, color stains, watermarks, etc.No more than 3 loose or hanging threads can be found on a product.(PVC products are the only exception as the nature of the material makes it harder to remove directly off the factory line). The “factory smell” is limited to none or within 10 inches and will be reduced to almost zero after several washes.All backing paper or lining must be removed. All embroidered patterns should be smooth.There shall be no skipping stitches, loose seams, or frequent opening of the threads in any stitching (including overlock).Seams and stitches must be done cleanly with consistency.Reused stuffing is strictly prohibited in any of our listed products.(Dry clean required product and knitwear are excluded) Pre-washed fabrics are preferred because they ensure that the ready-to-wears will not shrink massively after the first wash. All coating should remain whole after the first three washes. All printed fabrics need to be evenly and firmly coated with no residue on the surface.The colorfastness must be preserved without major change during the first three washes.Products that utilize eco-friendly materials are preferred.Fabrics with higher elongation rates and elasticity are preferred because they generally provide more comfort.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |